• search
Latest articles

Technical best practice advice tailored to help independent trade automotive professionals.

  • |
    Best practice: timing chain

    FAI Auto guides the PMM audience through the twists and turns of the timing chain. In the 30 years before ...

    FAI Auto guides the PMM audience through the twists and turns of the timing chain. In the 30 years before the millennium, engine timing was the work of the chain, not the belt. Whilst the technology h ...

    Read more

  • |
    MEYLE runs through a flex disc removal

    PMM hears from the MEYLE technical team on how best to remove and then install a flex disc on a Mercedes ...

    PMM hears from the MEYLE technical team on how best to remove and then install a flex disc on a Mercedes S211. Flex discs need to be able to withstand a great deal; strong forces, impacts and heat can ...

    Read more

  • |
    MS Motorservice provides fuel pump advice

    The technical team at MS Motorservice provides essential information to aid technicians faced with the po ...

    The technical team at MS Motorservice provides essential information to aid technicians faced with the possibility of a faulty fuel pump. Always check the contacts!  In the event of problems in the fu ...

    Read more

  • |
    NGK offers tips for installing Lambda sensors

    Ignition specialist NGK provides a few pointers on how to properly install Lambda sensors. When it comes ...

    Ignition specialist NGK provides a few pointers on how to properly install Lambda sensors. When it comes to Lambda sensors, the longevity of the component rests on two aspects: the first is the qualit ...

    Read more

  • |
    Textar delves into ABS sensors

    For most technicians, knowing your way around a braking system is second nature, but understanding how ce ...

    For most technicians, knowing your way around a braking system is second nature, but understanding how certain components work is not always high on the priorities list. With this in mind, Scott Irwin ...

    Read more

  • |
    Denso explains compressor best practice

    The lifetime of a compressor is only guaranteed when the correct amount of recommended oil is used. If co ...

    The lifetime of a compressor is only guaranteed when the correct amount of recommended oil is used. If contaminated by foreign oil or additives, such as the wrong or too much UV dye, the refrigerant m ...

    Read more

  • |
    Best Practice: Brake tester winter tips

    Gemco, the sales and service equipment specialist, provides five tips for brake testing during the winter ...

    Gemco, the sales and service equipment specialist, provides five tips for brake testing during the winter season. When it comes to brake testing, different site conditions can produce different result ...

    Read more

  • |
    Best Practice: Remember the resistor

    Denso explains why technicians should not overlook the resistor when changing the cabin blower fan. Cabin ...

    Denso explains why technicians should not overlook the resistor when changing the cabin blower fan. Cabin blowers generate a flow of air, which passes through the heater, ventilation and air condition ...

    Read more

  • |
    Best Practice: Specialist tools required

    Richard Newman, Comline’s Product Line Manager, explains why having specialist tools available is not onl ...

    Richard Newman, Comline’s Product Line Manager, explains why having specialist tools available is not only advisable, but often essential. When tackling the fitment of a wheel hub, such as the CHA045 ...

    Read more

  • |
    Case Study: Premature outer brake pad wear

    Apec Braking tackles the all-too-common issue of outer brake pad wear. The braking problem had endured ov ...

    Apec Braking tackles the all-too-common issue of outer brake pad wear. The braking problem had endured over the course of a few months. It had started with the owner of the vehicle purchasing the vehi ...

    Read more

  • |
    Best practice ABS Sensors

    Borg & Beck discusses how to approach the ABS sensors during the installation of rear brake discs on ...

    Borg & Beck discusses how to approach the ABS sensors during the installation of rear brake discs on Citroën and Peugeot vehicles. As more and more vehicles are being fitted with technology to ass ...

    Read more

  • |
    IGA teams up with the IPO

    The Independent Garage Association (IGA) has announced a collaboration with with the Intellectual Propert ...

    The Independent Garage Association (IGA) has announced a collaboration with with the Intellectual Property Office (IPO). The collaboration will aim to highlight the dangers of counterfeit and consumer ...

    Read more

  • |
    ‘Preventative maintenance is key at this time of year’

    In readiness for the changing of the seasons, ignition specialist NGK is urging workshops to recommend to ...

    In readiness for the changing of the seasons, ignition specialist NGK is urging workshops to recommend to owners of diesel cars that they replace their glow plugs now. Diesel has undergone a huge amou ...

    Read more

  • |
    Lumileds continues fight against counterfeit lighting

    Lumileds has launched a webpage, providing details of Philips’ authorised distribution partners both in t ...

    Lumileds has launched a webpage, providing details of Philips’ authorised distribution partners both in the UK and Ireland. The webpage has been launched in a bid to continue the company’s fight again ...

    Read more

  • |
    IAAF reveals details of upcoming Industry Briefing

    The Independent Automotive Aftermarket Federation (IAAF) has announced the details of its next Industry B ...

    The Independent Automotive Aftermarket Federation (IAAF) has announced the details of its next Industry Briefing Session. The session will be held at Haynes International Motor Museum in Sparkford, ne ...

    Read more