Professional Motor Mechanic

External factors that cause premature water pump failure

|Date: February 03, 2014

External factors that cause premature water pump failure

The quality of a water pump generally depends upon the use of high-grade components, as these ensure a co ...

The quality of a water pump generally depends upon the use of high-grade components, as these ensure a component repair in workshops and satisfied customers overall. Even the best selection of materia ...

February 03, 2014
Read more
How is belt wear identified?

|Date: December 27, 2013

How is belt wear identified?

At the Gates workshop seminar that took place during May’s MECHANEX outing in Manchester, several garage ...

At the Gates workshop seminar that took place during May’s MECHANEX outing in Manchester, several garage mechanics from the North West of England were concerned about the same technical issue. The que ...

December 27, 2013
Read more
‘Should we or should we not flush engines?’

|Date: December 11, 2013

‘Should we or should we not flush engines?’

‘To flush or not to flush’ is a conundrum that no doubt has faced the majority of workshop technicians. H ...

‘To flush or not to flush’ is a conundrum that no doubt has faced the majority of workshop technicians. Having carried out extensive research into deposit control and identifying that a quality oil fl ...

December 11, 2013
Read more
Drive system maintenance issues raised at Gates training sessions

|Date: December 06, 2013

Drive system maintenance issues raised at Gates training sessions

Despite the added expense to the job, most garages now accept the need to install timing belt kits, rathe ...

Despite the added expense to the job, most garages now accept the need to install timing belt kits, rather than just the belt. Current estimates indicate that at the scheduled change, Synchronous Belt ...

December 06, 2013
Read more
How to reduce turbocharger replacements

|Date: November 23, 2013

How to reduce turbocharger replacements

Since 1998, Volkswagen, Audi, Seat and Skoda diesel vehicles have been equipped with variable geometry tu ...

Since 1998, Volkswagen, Audi, Seat and Skoda diesel vehicles have been equipped with variable geometry turbochargers. Other manufacturers followed suit and the majority of diesels manufactured today u ...

November 23, 2013
Read more
Techron: Fuel system cleaners

|Date: November 06, 2013

Techron: Fuel system cleaners

Today’s modern engines are at the mercy of many variables that could ultimately affect the overall perfor ...

Today’s modern engines are at the mercy of many variables that could ultimately affect the overall performance and longevity of your customers’ cars. The indifferent quality of the fuel available on f ...

November 06, 2013
Read more
How to replace a timing belt on a Mazda 6

|Date: October 24, 2013

How to replace a timing belt on a Mazda 6

Launched in 2002, the timing belt system on the Mazda 6 may look ominous, but with a little know-how and ...

Launched in 2002, the timing belt system on the Mazda 6 may look ominous, but with a little know-how and the appropriate tools, it will prove to be an ideal repair for any UK garage. Engine type The e ...

October 24, 2013
Read more
Key requirements of efficient ABDS maintenance

|Date: October 08, 2013

Key requirements of efficient ABDS maintenance

It used to be easy to work out which ABDS belt required replacement and which belt looked fine. When belt ...

It used to be easy to work out which ABDS belt required replacement and which belt looked fine. When belts were made from a material known as chloroprene, it was relatively easy to identify wear from ...

October 08, 2013
Read more
A visual guide to timing system problems

|Date: October 02, 2013

A visual guide to timing system problems

Belt drive makes noise shortly after installation of CT 908K1 kit (VW/Audi, Seat, Skoda 1.6/2.0 L 8V) Pro ...

Belt drive makes noise shortly after installation of CT 908K1 kit (VW/Audi, Seat, Skoda 1.6/2.0 L 8V) Problem Shortly after installation of the kit, noise came from the cold engine (belt not aligning) ...

October 02, 2013
Read more
How to solve manifold ‘warping’ on the Daewoo/Chevrolet Matiz

|Date: September 25, 2013

How to solve manifold ‘warping’ on the Daewoo/Chevrolet Matiz

THE PROBLEM A common problem on the 800cc Daewoo/Chevrolet Matiz is corrosion to the alloy cylinder head ...

THE PROBLEM A common problem on the 800cc Daewoo/Chevrolet Matiz is corrosion to the alloy cylinder head and distortion (warping) of the plastic inlet manifold, resulting in a coolant leak between the ...

September 25, 2013
Read more
Timing system replacement – VW Polo III 1.4 16V

|Date: September 23, 2013

Timing system replacement – VW Polo III 1.4 16V

VMKC 01121-1 timing belt kit: Important pre-procedure notes The use of torque wrenches, in the setting of ...

VMKC 01121-1 timing belt kit: Important pre-procedure notes The use of torque wrenches, in the setting of this vehicle's timing system is crucial. Guessing the torque applied to the tensioners could p ...

September 23, 2013
Read more
Auxiliary Drive Belt Systems (ABDS) – issues with associated parts

|Date: September 03, 2013

Auxiliary Drive Belt Systems (ABDS) – issues with associated parts

At peak performance the belt, tensioner, idler and pulleys inside the Auxiliary Belt Drive System (ABDS) ...

At peak performance the belt, tensioner, idler and pulleys inside the Auxiliary Belt Drive System (ABDS) work together smoothly, to provide the drive for systems, such as the power steering, alternato ...

September 03, 2013
Read more
Belt tensioner failures – 1.7 turbo diesel system on various GM models

|Date: August 27, 2013

Belt tensioner failures – 1.7 turbo diesel system on various GM models

Problems in the market persist with the failure of the belt tensioner on the 1.7 litre turbo diesel engin ...

Problems in the market persist with the failure of the belt tensioner on the 1.7 litre turbo diesel engine used in many Vauxhall/Opel and Isuzu vehicles following the prescribed belt and tensioner cha ...

August 27, 2013
Read more
Troubleshooting – Renault Master 2.5D timing belt fitment errors

|Date: August 02, 2013

Troubleshooting – Renault Master 2.5D timing belt fitment errors

When installing a timing belt kit on models such as the Renault Master (this is also relevant to the 2.2D ...

When installing a timing belt kit on models such as the Renault Master (this is also relevant to the 2.2DCi variant), installation errors commonly occur as a result of: 1) Inappropriate tools 2) Out-o ...

August 02, 2013
Read more
How to replace the timing belt on a Renault Clio II

|Date: July 19, 2013

How to replace the timing belt on a Renault Clio II

Renault installs a large number of the Clio II 1.6 16V engine, with differing engine displacement in thei ...

Renault installs a large number of the Clio II 1.6 16V engine, with differing engine displacement in their vehicles. When the timingbelts are changed, there are some mistakes that we see time and agai ...

July 19, 2013
Read more