Power-TEC have released a pulling tower (part number 92657), that is completely mobile and with its pneumatic vacuum system, anchors to the workshop floor without the need for fixings. To use, place t ...

Glue pulling is an ideal repair process when there is restricted access behind the dent to be repaired and when used with care the paintwork will not be damaged. This kit from Power-TEC (part number 9 ...

Sometimes you just want to gently blow dust off a panel prior to painting, but the full workshop air pressure is just too much. The new adjustable-flow blow gun (part number 92624) from specialist bod ...

The Twist & Lock sanding block from Power-TEC has been designed to make changing abrasive paper, quicker and easier. The sanding block features a quick-change function allowing for the abrasive pa ...

Recently introduced into the Power-TEC range is the Zola Panel Repair Welder (part number 92605). It is a compact and powerful 16A panel repair welder. To operate, connect the slide hammer to the weld ...

Power-TEC’s Maxi Sanding Block (part number 92581) is 775mm long and 115mm wide. It is a hook-faced rigid sanding block that is designed to give you a consistent, flat finish on larger areas, like van ...

The compressed-air operated spray gun washer cabinet (part number 92544) from Power-Tec is suitable for solvent or water-based paint gun cleaning. Fitted with a long-lasting diaphragm pump for safety ...