AC & Thermal Management - Professional Motor Mechanic

AC & Thermal Management

ac-thermal-management

Why PAG and universal oils shouldn’t be mixed

Nissens, the automotive thermal systems expert, explains why technicians should avoid mixing PAG with universal oil...

in: Article
May 06, 2021
Dayco explores the pressure on VMs

In recent years, the pressure on VMs to meet emissions standards has led to significant changes to the primary driv...

in: Article
October 08, 2020
UFI provides filter replacement tips

PMM speaks with UFI Filters, a leading company in filtration and thermal management, to find out its top tips for t...

in: Article
October 07, 2020
Shrieve Group explores lubricants

The complexity of choosing the right oil for the electric compressors in A/C systems means that OEMs and mechanical...

in: Article
June 30, 2020
Liqui Moly explains its Radiator Stop Leak formula

Leaking cooling systems are annoying and eliminating leaks can be very time-consuming. Using a stop leak solution i...

in: Article
June 29, 2020
Denso explains compressor best practice

The lifetime of a compressor is only guaranteed when the correct amount of recommended oil is used. If contaminated...

in: Article
June 26, 2020
Mann+Hummel discusses cabin air filters

Cabin air filters are the main barrier against nitrogen oxides and particulate matter, preventing drivers from pote...

in: Article
June 25, 2020
Thermal management

Denso has added 121 original equipment (OE) quality part numbers to its thermal management range. The latest refer...

in: Products
April 07, 2020
Five steps to cleaning the cooling system

After designing a specialist tool to aid in cleaning a vehicle’s cooling system, Meyle explains how this new piece...

in: Technical
March 24, 2020
Thermostats

Dayco, engine products and drive systems supplier for the aftermarket, has introduced thermostats to its portfolio....

in: Products
February 28, 2020
Best Practice: Remember the resistor

Denso explains why technicians should not overlook the resistor when changing the cabin blower fan. Cabin blowers g...

in: Technical
February 10, 2020
REPXPERT thermal management masterclass

Over the summer, PMM was lucky enough to be invited to Schaeffler’s head offices in Minworth, Sutton-Coldfield, to ...

in: Article, Clutch Clinic, Technical
October 02, 2019
Electric avenue

HEVRA’s Pete Melville once again delves into the latest developments in hybrid and electric vehicle maintenance. In...

in: Technical
September 02, 2019
Best of both worlds

Scantec Automotive’s Ross Kemp explains how two specific cases highlighted the benefits of independents having acce...

in: Technical
August 23, 2019