The first idea that comes to mind when an electronic component fails is to replace the device. But is that really the best solution? ACtronics explains why an overhaul could be the better option.
The number of electronic components in a car has increased quite a bit in the last two decades and as a result, nowadays car mechanics really need extensive knowledge of electronics. Unfortunately, the work of diagnosing the problem is not over yet: most modern ECUs need to be coded, programmed and calibrated.
Therefore, replacing such a device also involves a lot of work. ACtronics are familiar with these procedures and argue that it makes more sense to overhaul the current device than to exchange it for a new one.
An example: ABS unit continental MK60
For example, let’s look at the ABS unit continental MK60 ACtronics technical guide on how to remove and install the ABS unit does not have many difficult steps to follow. So the replacement should be fairly easy for experienced mechanics. Of course you have to disconnect the battery and bleed the brakes properly beforehand, but nothing out of the ordinary.
See the “coding” section for the most important instructions. It says: “Only necessary for replacement devices. Remanufactured units do not need to be coded or programmed, they are plug and play. This is a positive message, because after the remanufacture you do not have the same difficulties as installing a new device.” Install, bleed the system, done.
But that’s not the only benefit of remanufacturing an ABS/ESP unit. Although manufacturers are constantly improving their products, modern electronic devices still have their weaknesses.
So you can replace a broken ABS unit with a new one, but the same problems could arise again in the near future. Modern overhaul services are always looking for improvements wherever possible.
So if you can eliminate weaknesses, why choose anything else?
Additionally, ACtronics’ remanufacturing services are said to be on par with OEM manufacturing processes. Recently, new robotised remanufacturing lines for TCUs (automatic transmission control units), instrument clusters and ABS units have been put into operation said to guarantee a consistently high-quality product.
Circular Economy
Besides the ease of installation and the level of quality, there is another important point to consider. Nowadays, people are increasingly worried about the environment. So if you are able to offer your customers an eco-friendly solution that is reliable and cost-effective, they would surely like this option. Don’t forget that a workshop that uses a green solution is considered a modern workshop. So you help the environment and the image of your workshop at the same time.
Be sure to choose a real expert for your overhauls, after all, brakes are a safety feature. Done right, however, a remanufacture makes sense in a number of ways. The company argues that it will definitely opt for remanufacturing rather than replacing at any time.
