• Laser Tools extends range

    The recently released locking wheel nut remover kit from Laser Tools (part number 8109) lets you remove a ...

    The recently released locking wheel nut remover kit from Laser Tools (part number 8109) lets you remove a locking wheel nut in minutes, without damaging the wheel. There are a number of different type ...

    Read more
  • 1.2 Puretech Belt in Oil – the best practice

    Welcome to the first Original Equipment Suppliers Aftermarket Association (OESAA) garage advice project. ...

    Welcome to the first Original Equipment Suppliers Aftermarket Association (OESAA) garage advice project. In this article, technical experts from OESAA will be looking at a 1.2 Puretech Belt in Oil sys ...

    Read more
  • Laser Tools launches test kit

    Part of the diagnostic routine for SCR (AdBlue injection) systems is to measure the pressure in the syste ...

    Part of the diagnostic routine for SCR (AdBlue injection) systems is to measure the pressure in the system both electronically, via the OBD diagnostic software and protocols, and dynamically, using pr ...

    Read more
  • Laser Tools launches latest product

    The brake pipe bending former from Laser Tools (part number 8032) allows the operator to copy the profile ...

    The brake pipe bending former from Laser Tools (part number 8032) allows the operator to copy the profile and curve of an existing brake pipe while avoiding kinks in the new pipe. The design enables t ...

    Read more
  • Laser Tools outlines memory saver

    Laser Tools recently released a memory saver that prevents the memory of on-board electronics from becomi ...

    Laser Tools recently released a memory saver that prevents the memory of on-board electronics from becoming lost when the vehicle battery is disconnected. PMM finds out how it works. If a vehicle’s ba ...

    Read more
  • Laser Tools introduces turbo system tester set

    This 13-piece turbo system tester set from Laser Tools (part number 7981) is designed to charge the turbo ...

    This 13-piece turbo system tester set from Laser Tools (part number 7981) is designed to charge the turbo system with low-pressure, regulated workshop air to indicate the presence of leaks within the ...

    Read more
  • Laser Tools releases vacuum tester

    Laser Tools has released an automotive test, tune-up and brake bleed vacuum pump with adaptor kit (part n ...

    Laser Tools has released an automotive test, tune-up and brake bleed vacuum pump with adaptor kit (part number 8018). It is ideal for a wide variety of automotive applications, such as tune-ups, diagn ...

    Read more
  • Laser Tools introduces bush kit

    The Rear Suspension Trailing Arm Bush Kit (part number 7829) from Laser Tools has been designed for easy, ...

    The Rear Suspension Trailing Arm Bush Kit (part number 7829) from Laser Tools has been designed for easy, in-situ removal and installation of these bushes in Vauxhall/Opel Combo-D van (from 2012) and ...

    Read more
  • Laser Tools introduces safety work boots

    Safety is a key consideration with these stylish and sturdy fully insulated safety work boots from Laser ...

    Safety is a key consideration with these stylish and sturdy fully insulated safety work boots from Laser Tools. With automotive technicians now frequently working with hybrid and fully electric vehicl ...

    Read more
  • Laser Tools develops mechanic’s support bench 

    Under-dash work is never a comfortable task! To make you more comfortable, Laser Tools has developed a me ...

    Under-dash work is never a comfortable task! To make you more comfortable, Laser Tools has developed a mechanic’s support bench (part number 7825). It is fully adjustable and foam padded, with a lengt ...

    Read more