Looking for something out of the ordinary? Try febi.
Have you ever needed a door lock actuator, or a replacement headlight washer nozzle, or even an oil dipstick? You might think that those parts are main dealer only, but before checking the vehicle manufacturer’s parts programme, why not try febiPLUS first?
febiPLUS combines more than 2,800 specially selected articles of different and more unusual product types for current car models – providing a solution, and alternative value-for-money repair option to the independent aftermarket. All articles are provided in OE-matching quality, endorsed by febi’s 3-Year Manufacturer Guarantee.
Engine and transmission
Timing chain covers
When completing a timing chain replacement or any other comprehensive engine repair, the timing chain cover usually has to come off. During removal, the timing chain covers can be either distorted or damaged due to the lightweight material they are made from or because they are bonded to the engine block with sealant.
If a distorted cover is refitted to an engine, it has the potential to cause an oil leak or, in extreme cases, come into contact with the timing chain, resulting in excessive noise or damage. febi recommends that whenever an engine repair requires removal of the timing chain cover, a new cover should be fitted to reduce the risk of potential issues.
Radiator fans with brushless motors
In older vehicles, the radiator fan would not operate without the engine running. This was hugely inefficient, as the engine had to keep running for a ‘cool-down’ period after the vehicle has stopped to protect heat-sensitive components like the turbocharger.
The more modern version is an electronically controlled fan. The switchable electromagnets give total cooling control, varying the speed and frequency of the motor with strong, permanent magnets, and a roller bearing for smooth operation. This all results in lower energy consumption – making radiator fans fitted with a brushless motor 20 to 30% more efficient than traditional cooling fan motors.
Rocker covers
A rocker (or valve) cover protects the internal-moving components of the engine and prevents any debris getting in, whilst also keeping the oil on the inside. Rocker covers were originally made from cast-alloy or pressed steel but – as with all other materials – a lighter and more adaptable alternative was eventually introduced.
Many rocker covers are now manufactured from a reinforced plastic, incorporating additional functions such as sound insulation and fixing points for additional pipes, hoses, and wiring. In many cases, they also integrate the positive crankcase ventilation valve. This is an integral function of the emission control strategy for the engine, directing hydrocarbons from the engine into the induction system.
Transmission oil and filter service kits
Regular oil changes prevent premature wear and increase gear shifting comfort, with new transmission oil contributing to lower fuel consumption and reduced CO2 emissions. febi Transmission Oil & Filter Service Kits provide a complete solution for a professional transmission oil change. Each kit includes high-quality filters, seals and screws, oil pans and the correct oil (made in Germany), offering the perfect maintenance solution for every workshop. febi provide kits for over 10,000 applications, including Dual-Clutch, Automatic Transmissions, CVT and even Haldex Couplings.
Chassis and body
Airbag clock springs
Airbag clock springs use a ribbon cable to ensure that the electronically controlled features stay connected to the body control units, whilst still allowing the wheel to rotate freely. These body control units include the drivers’ airbag, cruise control, and stability control (for the braking system). They all rely on data from the steering wheel angle sensor, as well as media control functions.
Each febi clock spring is supplied with a reset ring which is set in the central position, secured with a pin and ready for installation. The pin must be snapped off on the steering wheel hub after fitting to release the spring – it should not be snapped off prior to that.
Door lock actuators
The constant usage of a car door – opening and closing, locking and unlocking – makes the door’s lock mechanism prone to wear. Corrosion, as well as electrical failure of the actuator, switches, or circuit board, are all common reasons for malfunction. febiPLUS’ door locks include an innovative new feature: the metal components are treated with zinc-nickel alloy for anti-corrosion protection. During production, each part of the door lock is tested for functionality, ensuring high-quality and a long operational lifespan.
Gas springs
In modern cars, many bonnets are not supported by a traditional hand-latched rod, but using pressurised gas springs instead. The pressure inside the gas springs allows the bonnet to open smoothly on its own.
Gas springs consist of a piston rod and a cylinder. When the bonnet is closed, the piston rod is pushed into the cylinder, compressing the gas inside. Upon opening, the gas expands, supporting and holding the bonnet in place. To prevent the bonnet from failing, the gas pressure spring must be precisely matched to the bonnet’s weight and position points. In addition to our wide range of standard Gas Springs, we also offer a range of Electronic Gas Springs for vehicles with integrated electromotive drives.
Wiring harness repair kits
Save time and money with febiPLUS’ range of over 250 wiring harness repair kits! These high-quality kits are available for doors, rear doors, tailgate lamps, and headlamps. The kits feature coverings made with silicon, which resist thermal stress and remain flexible at all temperatures, helping to prevent cable breakage. Furthermore, the wire braids are tinned and extra fine-wired, giving the wire more flexibility and preventing corrosion of the braids upon contact with moisture. The wire ends are coated with a thin layer of tin, extending their lifespan up to ten times longer than non-tinned braids.
The febiPLUS range of products is constantly being reviewed and expanded with the latest exciting parts, this is part of our service commitment to stay ahead of the industry and provide our customers with ‘Fast to Market’ solutions.
