Delphi’s latest video on its Masters of Motion hub for independent garage technicians shows how to align Tesla headlights.
Delphi says that through its Masters of Motion training hub, it is committed to helping garages meet the demands future vehicles will present. The aim is to develop a stronger connection with the independent garage and workshop technicians that form ‘the backbone of the aftermarket’. Included in the hub are articles, training resources and top tips. The following step-by-step guide comes from a constantly expanding series of Delphi videos covering a range of workshop jobs including ADAS calibration, diesel injection, engine management and more.
The process
Adjusting the headlights on a Tesla is a similar process to any other vehicle. However, technicians should be aware that the Tesla Model 3 and Model Y have some key differences to be aware of, including a unique ‘calibration mode’ and adjustment process.
Here, Phil Mitchell, workshop solutions manager at Delphi, talks us through these differences with a step-by-step guide on how to align Tesla headlights at Delphi’s in-house training workshop in Warwick.
Step 1
Select ‘calibration mode’
Using the infotainment screen inside the cabin, select the car icon, ‘service menu’, and ‘adjust headlights’.
Step 2
Rear height sensor calibration
Take the car for a short test drive, allowing the vehicle to calibrate the rear height sensors. A full house of green ticks on the infotainment screen indicates that the vehicle is ready to begin the headlight calibration.
Step 3
Position the headlamp aligner
Ensure the headlamp aligner is parallel to the front of the vehicle before positioning it over the correct headlight.
Adjust the aligner height vertically, so the line is in the centre of the headlight. This ensures the best beam pattern in the headlamp beam setter.
Step 4
Headlight adjustment
Use the steering wheel’s left-hand scroll button to adjust the headlight up or down and left and right, as needed. To adjust the other headlight, tap the scroll wheel inwards. Carry out the same process to make the correct adjustments.
Once successfully adjusted, select ‘X’ on the screen to navigate away from the menu. This action will return the headlights back to their normal mode of operation.
Step 5
Visual inspection
Finally, perform a full light function check using the Tesla ‘feature light show’. This mode sees the vehicle perform synchronised light and movement sequences, providing an opportunity to ensure all lights are functioning correctly.
